Master
Cylinder |
Quality
Made in the
USA!
Master cylinder replaces all 1/2 and 3/4T WC and M37 Dodge
trucks
|
| |
|
Master
Cyl. Brake Switch |
Quality
Made in the
USA!
Master cylinder brake light switch.
|
| |
|
| Large
selection of used
including bed sides
call or email with needs.
|
1/2T Dodge sheetmetal
and ends, doors, hoods, ect.
Also mechanical parts. |
1/2T
Rear Wheel Cylinder Right |
Quality
Made in the
USA!
right side wheel cylinder replaces all late 1/2T Dodge
trucks with 14" rear brakes
|
| |
|
1/2T
Rear Wheel Cylinder Left |
Quality
Made in the
USA!
right side wheel cylinder replaces all late 1/2T Dodge
trucks with 14" rear brakes
|
| |
|
3/4T
Right Wheel Cylinder |
Quality
Made in the
USA!
right side front and rear wheel cylinder replaces all WC 3/4T, M37
and civillian Powerwagon Dodge
trucks
|
| |
|
3/4T
Left Wheel Cylinder |
Quality
Made in the
USA!
left side front and rear wheel cylinder replaces all WC 3/4T, M37
and civillian Powerwagon Dodge
trucks
|
| |
|
Rear
Axle Brake Hose |
Quality
Made in the
USA!
With armored spring replaces all 3/4T and M37 Dodge
trucks
|
| |
|
Front
Axle Brake Hose |
Quality
Made in the
USA!
With armored spring replaces all 1/2T (3 required), 3/4T and M37
Dodge
trucks 2 required.
|
| |
|
Just
found
small stash of ORIGINAL government issue WRENCH,SOCKET
This
socket will safely and easily remove the wheel bearing nuts and allow
more precise adjustment of those expensive wheel bearings.
No chisels or hammers needed! |
| NOS
Hub Wrench |
| 
This
hub wrench will safely and easily remove the wheel bearing nuts
. No chisels or hammers needed!
|
| |
|
14"
Brake Shoe |
NEW
1 3/4 X 14" brake shoe these are sold individually. Replaces
all late 1/2T rear shoes, and 3/4T WC and M37 front & rear shoes.
NO CORE CHARGE
|
| |
|
Set
of 8 Brake Shoes |
A full set of 8 NEW 1 3/4 X 14" shoes. Replaces all 3/4T WC
and
M37 Dodge
trucks.
NO
CORE CHARGE
|
| |
|
Rear
Outer Wheel Seal |
NEW
rear axle wheel bearing seal Replaces all 1/2 and 3/4T WC and M37
Dodge
trucks.
|
| |
|
Side Mirror w/Arm |
| 
High
Quality 5" round side mirror assembly. Used on all Dodge WC's,
Power Wagon's and M37 military trucks
|
| $29.90
|
|
Mil.
Issue 12V Bulb |
Will fit all Dodge WC's 3/4 & 1 1/2 ton trucks!
only mark on front is small GE logo in center. |
| |
|
Dodge
WC 3/4 Ton Wiring Kit |
A
composite kit manufactured for the 3/4 Ton WWII Dodge and contains
sufficient components to wire a Command Car or Weapons Carrier.
|
| |
|
|
Don't
want to place your order over the internet?
We
can now process your order safely and securely over the phone!
|
|
|
Push/Pull
Main Light Switch |
A
perfect reproduction of the original Headlight Switch used on the
Dodge WC's and every other truck used during WW2. This switch is
indistinguishable from the original including Mil Spec Silver Plated
contacts and the correct metal knob.
|
| |
|
Dash
Light Switch |
| 
Panel
switch for dash lights on all WC's, GPW's, Willys MB
As well just about any other WW2 vehicle
|
| |
|
B.O.
Light Switch |
| 
Blackout
light switch used with all WC's, GPW's, Willys MB with fender mount
blackout light. As well just about any other WW2 vehicle
|
| |
|
B.O.
Light Lamp |
| 
NOS
Dodge 6V blackout light.
|
| |
|
BO
Lamp Bucket |
New
production black out lamp bucket with door (trim ring)and mounting
bolt. Replaces all Dodge and any other WW2 military vehicle that
used a blackout light
|
| |
|
| Double
Pin Early Dodge / GMC |
 This
is the tail light connector found on early Dodge GMC and other early
series WWII Trucks as well as early Jeeps (also see Jeep / Motorcycle
Listing). This connector is the type that fits into the tail light
fitting rather than over the outside which is the more common fitting
used on general WWII production.
|
| |
|
| Single
Pin Early Dodge / GMC |
 This
is the tail light connector found on early Dodge GMC and other early
series WWII Trucks as well as early Jeeps (also see Jeep / Motorcycle
Listing). This connector is the type that fits into the tail light
fitting rather than over the outside which is the more common fitting
used on general WWII production. |
| |
|
1334
Dash Lamp |
| 
Dash
lamp for all Dodge WC's
2
required
Also
used on every otherWW2 vehicle as well. |
| |
|
1748
Dash Lamp Ext. |
| 
Dash
lamp extension used on mid to late Dodge WC's
Also
used on every other WW2 vehicle as well.
|
| |
|
Dash
Lamp Harness |
| 
Wire harness for dash lamps used on all WC's
|
| |
|
| Dodge
WC Marker Light |
 Marker
Light for the 3/4 Ton Dodge WC series WWII Trucks, supplied with
the correct Black wire with two white tracers ready to fit to your
Dodge Truck..
A perfect reproduction supplied in 6 volt and available in 12 volt
upon request. 2
required per vehicle
|
| |
|
LOOK
------->
NOS
12V Military issue headlamp bulb fits all Willys MB's & Ford GPW's
as well as Dodge 3/4T WC's and 1 1/2T 6X6 and Ford GTB's
Very
Limited Quanity's
|
NOS
12 V Headlamp |
Will fit all MB and GPW's as well as Dodge WC's 3/4 & 1 1/2
ton trucks!
only mark on front is small GE logo in center. |
| |
|
Headlamp
Bucket |
New
production headlamp bucket fits all Dodge 3/4 ton WC's
Complete
with door (trim ring) swivel bolt and grounding strap
|
| |
|
6
Volt Headlamp |
Wagner
6 volt headlamp
fits all MB and GPW's as well as Dodge WC's |
| |
|
Dodge
Oil Pressure Gauge |
Exact
copy of oil pressure gauge used on all Dodge WC's
Will
also work on other WW2 vehicles
|
| |
|
|
Tiger
Ey No. 100 Reflector |
 Outstanding
M.V. SPARES reproduction of the
Tiger
Ey No. 100 Reflector
Used
on Dodge WC's and most if not all M series vehicles |
| |
|
Truck
Side Mirror |
|  Outstanding
M.V. SPARES reproduction of the Classic WW2 truck mirror with bluish
tint to glass
Used on Dodge WC's, Chevy,GMC.IHC,Stude, ETC.
|
| |
|
WW2 Flat Back Windshield Catch |
Correct Flat back windshield catch
for
all Dodge WC's
1942-1945
|
| |
|
HOT
<------
NEW ITEM
Original
Style WW2
FLAT
BACK windshield catch
Never Before Available
|
| Dodge
3/4 Ton Spare Wheel Lock |
 Spare
Wheel Lock for the Dodge WC Series 3/4 Ton Trucks including Command
Car 3/4 ton Weapons Carrier and 6 x 6 Weapons Carrier. Please note
the Stud is for illustrative purposes only and is not included with
the lock. |
| |
|
A-313
Oil Can Bracket |
 A
perfect reproduction of the original bracket and is supplied in
34087 painted form.
This
bracket was used on all WW2 US Army vehicles either mounted on firewall
or fender well |
| |
|
AVM Lockouts |
Quality
AVM Hub Lockouts for all WC's and Dodge Power Wagon's from 1941
to 1975
16
Splines replaces Superwinch p/n 400508
The BEST price on the net
AVM
is the maker of SUPERWINCH HUBS |
| |
|
WC 1/2 Ton Split Rims |
Limited
qauntity
WW2
1/2 Dodge rims
most
are dated 1941
all
good take offs
Shipping
$25.00
per
rim |
| |
|
| |
Throttle
Cable |
Replacement
hand throttle cable with housing and knob
Heavy duty replacement will
fit all Dodge vehicles. |
| |
|
RETURN TO TOP