Click
on pic to enlarge |
|
DANA
MODEL 25 Reference numbers in diagram are color coded below. White
represents parts used in both front and rear axles. Reference
numbers in blue
are only used by front axle. Numbers in
green are for rear axle
only. Oil capacity for this axle is 1 1/4 quarts.
|
|
Click
on pic to enlarge |
|
| DANA
MODEL 23 Reference numbers in diagram are color coded below. White
represents parts used in both front and rear axles. Reference numbers
in blue are only used
by front axle. Numbers in green
are for rear axle only. Oil capacity for this axle is
1 1/4 quarts. |
|
#1
Gasket Differential |
Differential
cover gasket
for
front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#2
Ring Gear Carrier |
Carrier
with gasket, shims and ring bolts
for
front or rear axles specify gear ratio
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
NEAPCO
U-Joint |

These
NEAPCO brand U-Joints are proudly Made
in the USA
and will replace all front and rear u-joints used in all
Willys MB, CJ's and Ford GPW's
4
required per vehicle
|
| $16.90
|
|
Spicer
Dust Cap Kit |

Spicer
brand
are proudly Made in The
USA
and will replace all front and rear drive yoke dust cap with
seal used in all Willys MB, CJ's and Ford GPW's
2
required per vehicle
|
| $12.90
|
|
#3
Spider Gear Kit |
For
front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#4
Carrier Bearings |
Ring
gear carrier bearings for front or rear axles two are required
per axle
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#5
Carrier Bearing Cup |
Bearing
cup for ring gear carrier for front or rear axles two are required
per axle
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#6
Carrier Shim Kit |
Shim
kit for carrier bearings for front or rear axles
Fits
all Willys MB, CJ2Aand Ford GPW's
|
| |
|
#7
Ring & Pinion |
Spicer Dana 25/23 front or rear axles 4.88 ratio
Fits
all Willys MB, Ford GPW's
NOS
Limited Qty.
|
| |
|
#8
Pinion Bearing & Cup |
Inner
pinion bearing and cup for front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#9
Pinion Bearing & Cup |
Outer
pinion bearing and cup for front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#10
Pinion Shim Kit |
Shim
kit for pinion bearings front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#11
Pinion Nut |
Nut
for pinion for front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#12
Pinion Washer |
Heavy
washer for under pinion nut for front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#13
Pinion Oil Seal |
Oil
seal for pinion front or rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
|
#14
Front Axle Shaft Short |
Passenger
side axle shaft inner and outer with u-joint
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#14
Front Axle Shaft Long |
Driver
side axle shaft inner and outer with u-joint
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
"F"
Axle Shaft Short |
Original
FORD GPW "F" marked axle shaft short side
Checked
for cracks and fractures
Qty's limited
|
| |
|
"F"
Axle Shaft Long |
Original
FORD GPW "F" marked axle shaft long side
Checked
for cracks and fractures
Qty's limited
|
| |
|
#14
Rear Axle Shaft Short |
Passenger
side axle shaft for rear axle
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#14
Rear Axle Shaft Long |
Drivers
side axle shaft for rear axle
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#15
Inner Oil Seal |
Inner
oil seal for front axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
|
|
|
#15
Oil Seal Outer |
Outer
oil seal for front and rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#16
Spindle Bushing |
Bronze
bushing for spindles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#16
Inner Oil Seal |
Inner
oil seal for rear axles
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#17
Drive Flange Gasket |
Front
axle drive flange gasket
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#17
Axle Bearing |
Rear
axle drive shaft bearing and front hub bearing
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
King Pin Bearing Shims |
Front
axle king pin bearing shim adjustment pack
Fits
all Willys MB, CJ2A and Ford GPW's
|
| $5.90
|
|
|
#18
Drive Flange |
Front
axle drive flange
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#18
Bearing Cup |
Rear
axle drive shaft and front hub bearing bearing cup
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#23
King Pin Bearing |
Front
axle king pin bearing four are required. Timken Brand
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
#24
King Pin Bearing Cup |
Front
axle king pin bearing cup four are required. Timken Brand
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
| Hub
Wrench |
| 
This
hub wrench will safely and easily remove the wheel nuts shown at
the left. No chisels or hammers needed!
|
| |
|
#19
Wheel Nut/Washer Set |

Finish
your brake job off the right way,toss those beat to death nuts and
washers. Fits every MB and Ford GPW's as well as CJ's and don't
forget to buy the tool listed opposite so you don't ruin these.
4 sets are required |
| |
|
New
& Improved!
We got rid of the messy hard to handle squeeze bottle
and put it in a convenient grease gun cartridge and increased the amount
from 16oz. to 28oz.
Now you can fill your steering gearbox as well and still have enough left
over to top them off during routine maintenance |
A
fantastic and faithful reformulation of this grease has become available.
This is the lubricant that is specified by Willys Overland in their service
manuals. Lubrication
Use of the proper lubricant for the steering knuckle bearings is very
important. The lubrication section of the Jeep Service Manual specifies
Universal Joint Lubricant. This material is a semi-liquid grease |
#21
Knuckle Seal Kit |
Front
axle knuckle seal kit
Fits
all Willys MB, CJ2A and Ford GPW's
|
| |
|
Knuckle
Lube |
Front
axle knuckle lube kit
contains enough lube for two knuckles & steering box
For
all Willys MB, CJ2A and Ford GPW's
|
| $28.90
|
|
Valve
Stem Protectors |
A
perfect copy of the rare valve stem protector.
5
required per vehicle |
| |
|
<--------
NEW ITEM
Top
off your restoration and simplify your tire installation with these
Super hard to find valve stem protectors
|
Combat Rim |
Get
your project rolling with a new set combat rims!
Complete with caution tags, rim nuts and bolts.
shipping will be billed separately
|
| |
|
Price
Drop! NDT Tires |

600-16
Military non directional tires complete with tube and flap
Fits
all Willys MB, CJ2A and Ford GPW's
Shipping will be invoiced separately
|
| |
|
Tire
Flap |
Heavy
rubber flap protects inner tube from being damaged by combat rim
5
required per vehicle |
| |
|
Inner Tubes |
High
quality inner tubes
with proper offset valve stem
Fits
all Willys MB, CJ2A and Ford GPW's
|
| $17.90
|
|