Give
yourself a brake with from
Northwest |
Quality
brake components
Military Vehicles
|
Mst. Cylinder Kit |
Complete
kit to rebuild your master cylinder |
| |
|
Master
Cylinder |
Foreign
manufacture master cylinder same quality as the now
discontiued Mexican made Wagner
just cost less and as an added bonus same style as the ORIGINAL!
Fits
all MB/GPW's |
| |
|
Brake
light Switch |
Brake
light switch for all MB and GPW's
Fits
all MB/GPW's |
| |
|
Support
Plate |
Almost
always missing support plate for master cylinder
available
"F" marked
Fits
all MB/GPW's |
| |
|
Special
Bolt W/Washers |
 Bolt,
Master Cylinder Fitting (Holds fitting on front of master cylinder
with washers and accepts stop light switch)
Fits all Mb/GPW's |
| |
|
Outlet Fitting |
Brass
outlet fitting fits on master cylinder bolt pictured on the left.
Has two 3/16" outlets for front and rear brake lines |
| |
|
Early
Brake Line set |
Complete
set of preformed brake lines Includes master cylinder frame set,
axle sets front and rear with fabric loom pieces to protect lines
from clamps which are also included
1941 - early 1942 |
| |
|
Standard
Brake Line Set |
Complete
set of preformed brake lines Includes master cylinder frame set,
axle sets front and rear with fabric loom pieces to protect lines
from clamps which are also included
Mid
1942 - 1945 |
| |
|
S-Brake
Line |
S
brake from knuckle to wheel cylinder used on all Willys MB and
Ford GPW's.
2
required
|
| |
|
Set
of 4 Brake Hoses |
Set
of four brake hoses. Includes
2-
6" hoses from axle to knuckle
1-
11" hose frame to axle (front)
1-
15" hose frame to axle (rear) |
| |
|
1" Wheel Cylinder Kit |
Complete
kit to rebuild your front wheel cylinder |
| |
|
3/4" Wheel Cylinder Kit |
Complete
kit to rebuild your rear wheel cylinder |
| |
|
Brake
Line TEE |
Brass T Fitting mounts on
rear axle tube 1941-73
|
| |
|
Brake
Hose Retaining Clip |
Brake Hose Retaining Clip
|
| |
|
Rear Cyl. |
Quality
foreign made rear wheel cylinder fits all Willys MB and Ford GPW's
|
| |
|
Front
Cyl. |
Quality
foreign made front wheel cylinder fits all Willys MB and Ford
GPW's
|
| |
|
Master
Brake Kit |
The
whole kit n caboodle!
1
Master cylinder,1 master cylinder fitting, 4 wheel cylinders, 2
sets of shoes, 4 drums, 4 return springs and 2 S-brake lines and
4 hub seals, 1 brake light switch.
Fits
all MB & CJ2A 41 thru 47 w/holes
3 1/8th on center
|
| |
|
Pro
Brake Kit |
The
kit without the caboodle!
1
Master cylinder, 1 master cylinder fitting, 4 wheel cylinders, 2
sets of shoes, 4 return springs and 2 S-brake lines and 4 hub seals,1
brake light switch.
Fits
all MB & CJ2A 41 thru 47 w/holes
3 1/8th on center
|
| |
|
Brake Push Rod |
Fit
all MB/GPW's
|
| |
|
Don't
want to place your order over the internet?
We
can now process your order safely and securely over the phone!
|
|
|
Wheel
Nut/Washer Set |
Finish
your brake job off the right way,toss those beat to death nuts and
washers. Fits every MB and GPW's as well as CJ's and don't forget
to buy the tool listed opposite so you don't ruin these.
4 sets are required |
| |
|
| Hub
Wrench |
| 
This
hub wrench will safely and easily remove the wheel nuts shown at
the left. No chisels or hammers needed!
|
| |
|
| Oversize
Lug Nut LH |
| These
have a larger 13/16" hex
for
rims with worn lug holes
Year:
41-86
|
$1.25 |
|
|
| Oversize
Lug Nut RH |
| These
have a larger 13/16" hex
for
rims with worn lug holes
Year:
41-86 |
$1.25 |
|
|
| Wheel
Stud LH |
| 
Lug
stud, LH, original type, 1-9/16" long
Years 41 to 64
|
| |
|
| Wheel
Stud RH |
| 
Lug
stud, RH, original type, 1-9/16" long
Years 41 to 64 |
| |
|
| Std.
Lug Nut LH |
| Lug
Nut, LH thread, 3/4" hex
Year:
41-46
|
$1.25 |
|
|
| Std.
Lug Nut RH |
| Lug
Nut, rH thread, 3/4" hex
Year:
41-86
|
$1.25 |
|
|
Hub Assem LH Thread |
Front/rear
Hub w/LH studs
Willys
MB Ford GPW |
| |
|
Hub Assem RH Thread |
Front/rear
Hub w/RH studs
Willys
MB Ford GPW |
| |
|
Set
of Brake Shoes |
Set
of four shoes will fit front or rear of all Willys MB and Ford
GPW's
2
sets are required per vehicle |
| |
|
9"
Brake Drum |
New
9" brake drums will fit front and rear of all
Willys
MB, CJ2A and 3A
4
are required per vehicle |
| |
|
9"
Dismountable Drum |
Dismountable
drum will fit front or rear of all Willys MB & Ford GPW |
| |
|
Now
here is a usefull modification replacement 9" drums that fit over
your hubs! This means you don't have to mess with those greasy bearings!
Simply take the wheel of and the drum will pull off from the hub and
shoes.
|
| Anchor
Pin Kit |
| 
1941-53
MB, CJ2A, CJ3A, M38 BRAKE SHOE ANCHOR PIN KIT
|
| |
|
| Brake
Shoe Adj. Cam |
| 
1941-53
MB, CJ2A, 3A & M38 ANCHOR CAM FOR BRAKE SHOES
|
| |
|
| Upper
Shoe Adj. Bolt |
| 
Upper adj. bolt for brake
shoes
2 required per drum
|
| |
|
|
Hub
Oil Seal |
Oil
seal for brake drum
Fits
all Willys MB, CJ2A, 3A and Ford GPW's
|
| |
|
Brake
Shoe Return Spring |
1941-66
MB, M38, M38A, ALL CJ's, UPPER SPRING FOR BRAKE SHOE RETURN
4
springs are required |
| |
|
Lower
Brake Arm |
Fit
all MB/GPW's
|
| |
|
| IDLER
SHAFT BRAKE
|
| 
MB, GPW brake arm shaft |
| |
|
| Brake
Pedal |
| 
MB, GPW brake pedal |
| |
|
630593
Spring Clutch & Brake |
The correct style and specification for the WWII MB Ford GPW Clutch
Pedal or Brake Pedal.
Two
(2) are required for a Jeep
Fit
all MB/GPW's
|
| |
|
GPW
Felt Pedal Grommets |
A
set of two (2) correct Felt Grommets for the clutch and brake pedal
shafts as used on all Ford GPW WWII Jeeps. |
| |
|
MB
Pedal Draft Seals |
A
set of two felt Grommets, washers and springs for the clutch and
brake pedal shafts as used on all Willys MB WWII Jeeps. |
| |
|
E-Brake
|
|
A-5335
Spring Handbrake |
The
correct style and specification for the WWII MB Ford GPW Hand Brake
or Emergency Brake. The Spring is painted Olive Green so you just
have to install it.
Fits
all MB/GPW's |
| |
|
External
E-Brake Band |
New
emergency brake band. External drum type replaces all early to
mid war Willys MB's and all Ford GPW's
EXCHANGE
ONLY!
|
| |
|
E-Brake Handle |
Emergency
brake handle with cabler fits Willys MB's and Ford GPW's
|
| |
|
MVK-1019
Spring Set |
 This
set contains 1 A-5335 Handbrake Return Spring, 1 A-1469 Generator
Spring, 2 630593 Clutch and Brake Springs and 1 633011 Accelerator
Spring
|
| |
|
RETURN TO TOP